User Manual

7. Automatic Control

      7.3. Light

When auto mode is ON, output is regulated according to time.
For this purpose, 3 parameters are necessary: 
Intensity, Light On and Light Off.
(Sunrise and Sunset are optional)

Between Light On and Light Off (0-23h format), output is ON at Intensity %.

With Sunrise and Sunset, the light is dimmed from 0 to intensity %, during the set duration.

Light dimming works with direct LEDs drive and dimmable LED panel. 
Note: Meanwell dimmable LED drivers are 100% compatible with Digiplant.

Dimming is not compatible with relaybox (ON/OFF only).
Then, Intensity must be set to 100% , Sunrise and Sunset to 0.